top of page
Structural Repair
Resource Center
Technical articles, engineering insights, repair guides, and project highlights covering carbon fiber reinforcement, concrete repair, structural strengthening, and rehabilitation.


Ongoing third party testing plays an integral role in any structural reinforcement solution
Ongoing third party testing plays an integral role in any structural reinforcement solution that is relied upon to protect the safety of the community and the livelihoods of the professionals who install it. #structuralreinforcementsolutions #structuralrs #reinforcement #concreterepair #concretelife #concreteconstruction #engineered #carbonfiber #structuralengineering #foundationrepair #parkinggarage #stabilization #waterproofing #structuralengineers #structure #constructioni
Jan 24, 20201 min read
Carbon Fiber Strengthening systems that can perform like a Swiss Army knife
When we set out to develop our roll kits, one of the objectives we had in mind was to provide contractors with systems that had utmost versatility in the field without compromise. Unidirectional and Bidirectional Carbon Fiber can solve a vast spectrum of repairs. Each roll kit is designed to perform in the most demanding of applications - from beam and flexural strengthening to bowed wall stabilization. It was imperative to us that contractors could confidently install SRS co
Jan 14, 20201 min read


Bidirectional and Unidirectional Carbon Fiber working together
In this case, a combination of both bidirectional and unidirectional Carbon Fiber are being used to strengthen a block CMU wall. The SRS-660BI is used as a localized crack repair but also provides restraint between the vertical straps similar to a waler system. The SRS-660UNI vertical straps provide increased flexural strength over the entire height of the wall. #structuralstrengthening #structuralengineers #concreteconstruction #structuralengineering #concreterepair #conc
Jan 12, 20201 min read


Crack repair to crawlspace footing using SRS-660BI Carbon Fiber
Horizontal cracks like this are usually the result of the reinforcing steel too close to the outer edge of the forms. When the forms are stripped, and if the conditions of the steel being hot on the day of the pour, a fine micro crack appears, concrete around the steel curing outwards meeting the normal curing of the concrete curing from the outside towards the middle. Then with seismic activity or maybe foundation settlement, the foundation bends a little, causing the crack
Jan 9, 20201 min read


Carbon Fiber column confinement for increased flexural capacity
Unidirectional Carbon Fiber Reinforced Polymer (CFRP), is frequently used for increasing flexural capacity of reinforced concrete columns subjected to bending and compression As we all know, concrete is great in compression but lacks the tensile properties necessary for the demands so is usually poured with steel rebar embedded in it. This rebar provides the necessary tensile requirements so that the concrete can perform for the intended application. If this rebar is missing
Jan 9, 20201 min read
bottom of page