top of page
Structural Repair
Resource Center
Technical articles, engineering insights, repair guides, and project highlights covering carbon fiber reinforcement, concrete repair, structural strengthening, and rehabilitation.


Retaining wall repair
The most common signs of failure in a retaining wall are cracking (horizontal, vertical and/or stair-step) tilting out of plumb. Several factors can cause these failures such as lack of proper reinforcement, settlement or expansion of the soil, improper drainage behind the wall, (lack of weep holes or clogged holes), overloading of the wall, construction errors, foundation footing problems, and/or other design errors. Carbon fiber provides a cost effective and permanent solut
Jul 10, 20201 min read


Ongoing third party testing plays an integral role in any structural reinforcement solution
Ongoing third party testing plays an integral role in any structural reinforcement solution that is relied upon to protect the safety of the community and the livelihoods of the professionals who install it. #structuralreinforcementsolutions #structuralrs #reinforcement #concreterepair #concretelife #concreteconstruction #engineered #carbonfiber #structuralengineering #foundationrepair #parkinggarage #stabilization #waterproofing #structuralengineers #structure #constructioni
Jan 24, 20201 min read
Carbon Fiber Strengthening systems that can perform like a Swiss Army knife
When we set out to develop our roll kits, one of the objectives we had in mind was to provide contractors with systems that had utmost versatility in the field without compromise. Unidirectional and Bidirectional Carbon Fiber can solve a vast spectrum of repairs. Each roll kit is designed to perform in the most demanding of applications - from beam and flexural strengthening to bowed wall stabilization. It was imperative to us that contractors could confidently install SRS co
Jan 14, 20201 min read


Cracked and broken foundation corners
Cracked and broken foundation corners are a common issue where settlement has occurred in a homes foundation. These types of repairs are...
Jan 9, 20201 min read


What’s the difference in the SRS Carbon Fiber weaves? SRS-600UNI vs SRS-660BI
In the two fabrics offered by SRS, the SRS-600UNI and SRS-660BI, the UNI is short for unidirectional and BI is short for bidirectional. Unidirectional carbon fiber means all of the fibers run in the same direction. In the case of the SRS-600UNI the weave consists of and aerial weight of 600 grams of carbon fiber per square meter running the length of the roll. Bidirectional carbon fiber means that the fibers are running in two different directions. In the case of the SRS-66
Jan 7, 20205 min read


Concrete Column Repair
SRS-660BI Carbon Fiber is commonly used to wrap support columns or other structural components, adding a tensile capacity of 35,496 lbs per 12” When a column is wrapped with a bidirectional carbon fiber not only is the confining/load bearing strength of the column increased, but also the flexural strength of the column itself. As the fabric wraps the column it must lap back onto itself in order to achieve the necessary bond capacity to act as a continuous wrap. #structura
Jan 7, 20201 min read


Bowed Wall Stabilization using Unidirectional Carbon Fiber
Crossroads Foundation Repair was called out to a house in Brownsburg, Indianna to inspect a home where the basement walls were exhibiting some signs of horizontal and step cracking as well as bowing. Upon the completion of the inspection Kyle Leeman, Owner of Crossroads Foundation Repair, suggested the use of carbon fiber to reinforce the walls and prevent any further movement or damage. Kyle reached out to Structural Reinforcement Solutions, to obtain material for the repair
Jan 7, 20202 min read
bottom of page