top of page
Structural Repair
Resource Center
Technical articles, engineering insights, repair guides, and project highlights covering carbon fiber reinforcement, concrete repair, structural strengthening, and rehabilitation.


Unidirectional vs. Bidirectional Carbon Fiber: What’s the Difference?
Choosing between unidirectional and bidirectional carbon fiber depends on how the structure carries load. Unidirectional carbon fiber provides maximum tensile strength in one direction, making it ideal for flexural strengthening and bowed wall stabilization. Bidirectional carbon fiber reinforces in two directions, making it better suited for crack repair, column confinement, and localized structural reinforcement. In this guide, we'll explain the differences, typical applicat
Mar 1, 20236 min read


Bowed Wall Stabilization using Unidirectional Carbon Fiber FRP
As we all know, concrete is great in compression but lacks the tensile properties necessary for the demands so is usually poured with steel rebar embedded in it. This rebar provides the necessary tensile requirements so that the concrete can perform for the intended application. If this rebar is missing, damaged, or deteriorated, carbon fiber can be added to an existing structure in order to provide the necessary tensile capacities related to a specific load pattern. The SR
Jun 23, 20201 min read


Structural capacity lost due to deterioration of the reinforcing steel, repaired with CFRP
In cases where structural capacity is lost due to deterioration of the reinforcing steel, CFRP can be used to strengthen and restore structural components, such as this crawl space in California. In this case, the use of SRS-660 BI accomplishes two things. It provides strength across the repair to keep the patch material in place and also adds strength along the straps length to make up for any resulting strength reductions related to section loss of the corroded reinforcing
Jan 9, 20201 min read


What’s the difference in the SRS Carbon Fiber weaves? SRS-600UNI vs SRS-660BI
In the two fabrics offered by SRS, the SRS-600UNI and SRS-660BI, the UNI is short for unidirectional and BI is short for bidirectional. Unidirectional carbon fiber means all of the fibers run in the same direction. In the case of the SRS-600UNI the weave consists of and aerial weight of 600 grams of carbon fiber per square meter running the length of the roll. Bidirectional carbon fiber means that the fibers are running in two different directions. In the case of the SRS-66
Jan 7, 20205 min read
bottom of page